Irrigation Floating Pump

Home » Products » Multifunction Floating Pump » Irrigation Floating Pump
Irrigation Floating Pump

The irrigation floating pump we manufacture can float on the water,go down or up according to the water level. It is specially design for irrigation. It is floating designed and it avoids the risk of being jammed.

Technical Parameters
Mode Power (W) Voltage (v/50Hz) Head (m) Flow (m3/h) Pipe diameter (mm /inch) Weight (kg) 20
Container
(set)
FB1800-5-55 1800 380 tri-phase 5 55 100(4) 20 500
FBD1500-4-55 1500 220 single-phase 4 55 100(4) 20 650
FB1500-6-40 1500 380 tri-phase 6 40 80(3) 16 650
FBD1100-7-30 1100 220 single-phase 7 30 80(3) 16 650
FB1100-7-30 1100 380 tri-phase 7 30 80(3) 15 650
FBD750-5-25 750 220 single-phase 5 25 80(3) 15 650
FB750-7-20 750 380 tri-phase 7 20 65(2½) 14 730
FBD550-5-20 550 220 single-phase 5 20 65(2½) 14 730
FB750-12-8 750 380 tri-phase 12 8 50(2) 14 730
FBD550-12-8 550 220 single-phase 12 8 50(2) 14 730
FB370-4-10 370 380 tri-phase 4 10 50(2) 7.5 1100
FBD250-4-10 250 220 single-phase 4 10 50(2) 7.5 1100
FB370-12-2 370 380 single-phase 12 2 25(1) 7.5 1100
FBD250-12-2 250 220 single-phase 12 2 25(1) 7.5 1100

This machine can be easy to operate and maintain. Its motor has sealed axle which is impossible to be stocked by the mud and sand from the bottom of river or pond so it has long service life.

User needn't build pump station and only need to put the pumjp into the water then turn on the switch. It can inhale water itself and won't be influenced by the rain or water. it is small in size and light in weight. It can be moved away easily.

This device can change water absorption lift into water pressure lift,Its intake mouth will always be in 25 to 50cm below the water level and that is exactly the most suitable position to inhale water. It has short pipe and do not need a bottom valve,so it can save 10 to 30% of electricity power.

The temperature inhaled by our floating pump is higher than water in the bottom. That is good for the growth of crops. E.g.it can increase the output of rice by 5% per hectare.

FORDY is a professional irrigation floating pump manufacturer based in China. The wide range of products we offer includes fountain aerator, high efficiency paddlewheel aerator, paddlewheel aerator, and more.

Feedback Form
Other Products
  • Jet Aeration Floating PumpOur Jet aeration floating pump is made up of pump, injector and air intake duct. Its work process can be described as when injector starts to inject the water, a vacuum cavity inside forms and the air pours in. Then injector injects the water and air together at a high speed. In this way, the goal of aeration can be fulfilled...
  • Spraying Aeration Floating PumpOur spraying aeration floating pump used to be inspected by national technology supervision institution for many times and its aeration efficiency and dynamic efficiency both exceed the standards by more than 60%. It also can be used as water drawer, removing the injection nozzle. Moreover, it is light in weight, small in size. It generates no noise and oil pollution...